Elmo TT-12 Bedienungsanleitung PDF herunterladen (Seite 3)

LAPTOP COMPUTER, DOCUMENT CAMERA, PROJECTOR

Here is where the fun begins. The following setup will let you use all the features of the ELMO TT-02s.

• Think of the ELMO TT-02s as the centerpiece of this set up. Put the laptop on one side of the ELMO and

put the projector on the other side of the ELMO.

• Hook up the ELMO TT-02s to the projector as we have just done in the above setup.

• Use the RGB cable that came with the document camera and hook that cable to your extra monitor port on

the back of the Laptop and attach it to the RGB IN on the back of the ELMO TT-02s.

• Attach the USB cable (provided) from the ELMO TT-02s back to the Laptop. NOTE … you should add the

ELMO Imagemate software to your computer before attaching the USB cable from the TT-02s.

What you have done with this setup is used the TT-02s as the “Switcher”. Everything now goes through the ELMO TT-02s.

You will see the buttons on the TT-02s. (Figure # 3) You can view either the computer or the document camera through the

Projector with a push of a button.

You can view your computer in this setup even when the ELMO TT-02s is turned off. One feature of the TT-02s is that it

offers an active pass through. When the ELMO TT-02s is off the computer image will automatically pass through to the

projector.

Please make sure to view the other Training sessions that I have placed in the HELPFUL HINTS section of the ELMO web

site. (Figure #4) If you have any questions with this session please email me directly at agraziano@elmousa.com

Figure #1

Once the camera has been turned 180 degrees, Image #1 shows the proper setup of the TT-02s. Note that all the cable

hook-ups are in the back of the unit.

1 2 3 4 5 6 7 8 ... 24 25

Keine Kommentare

Elmo TT-12 Bedienungsanleitung Seite 3